Reset “616” Code on 2012-2013 J-300 & LX Collection Models:

Once the duration countdown timer for the CLEARRAY System has reached zero, you will need to reset it, replace the UV lamp bulb and clean the quartz tube. To reset the duration countdown timer:

1. Press and hold the Jets pump 1 and Cooler (-) button at the same time for 3 seconds.

2. Press the Warmer (+) button until the display shows “0”.

3. If the timer has reached “0”, pressing the Jets pump 1 button will reset the counter. If the timer is not at “0” pressing the Jets pump 1 button will not reset it.

Note: If the spa power is interrupted, the duration countdown timer is not affected. The number of days remaining is stored in the memory and will continue to countdown once power is regained.

4. If the duration countdown timer is not at “0” and you need to reset it:

A. Press and hold the Jets pump 1 and Cooler buttons at the same time for 3 seconds.

B. Press the Warmer button to scroll to “U”.

C. Press the Jets pump 1 button to switch from “U” to “O3”.

D. Press and hold the Jets pump 1 and Cooler buttons at the same time for 3 seconds.

E. Press the Warmer button to scroll to “O3”.

F. Press the Jets pump 1 button to switch from “O3” to “U”. The timer has been reset to 365 days.

Please note: This will only work 2012-2013 J-300 and 2012+ LX Collection Hot Tubs. If you have a J-400 Collection Hot Tub or a 2014+ J-300 model, please refer to our main ClearRay Reset section for your appropriate model.